Discarded Furniture Panels with Different Densities and Resin Contents

Floresta e Ambiente

Rodovia BR 465, km 07, Campus da UFRRJ - IF-NIDFLOR - UFRRJ
Seropédica / RJ
Site: http://www.floram.org
Telefone: (21) 2681-4986
ISSN: 2179-8087
Editor Chefe: João Vicente de Figueiredo Latorraca
Início Publicação: 31/12/1993
Periodicidade: Trimestral

Discarded Furniture Panels with Different Densities and Resin Contents

Ano: 2020 | Volume: 27 | Número: 2
Autores: Zamarian, Esoline Helena Cavalli; Iwakiri, Setsuo; Trianoski, Rosilani; Albuquerque, Carlos Eduardo Camargo de
Autor Correspondente: Esoline Helena Cavalli Zamarian | [email protected]

Palavras-chave: recycling; wood panel; mobile residues

Resumos Cadastrados

Resumo Inglês:

This study evaluated the quality of the particleboard produced with particles generated from mobile discharges with mixture of equal parts of industrial particles of Pinus. The material was collected and processed in the form of chips by a company specialized in waste recycling. The experimental plan consisted in producing panels with nominal density 0.55, 0.70 and 0.85 g/cm3, and urea-formaldehyde resin of 8, 10 and 12%. The increased density and resin content contributed to improve the physical and mechanical properties of the panels. The panels produced with nominal density of 0.70 and 0.85 g/cm3, and 10% resin content, showed better feasibility of using mobile discharges particles in a proportion of 50% mixture with particles of Pinus industrial production of particleboards.